FM TRANSMITTER AND BROADCASTING SYSTEMS

AAREFF FM TRANSMITTER HOME 50mW STEREO 100mW FM TRANSMITTER 1W FM TRANSMITTER 12W FM TRANSMITTER 30W FM TRANSMITTER 100W FM TRANSMITTER TRANSMITTER PARTS TECH INFO TERMS & CONDITIONS BACK

30 WATT FM TRANSMITTER SYSTEM PROFESSIONAL RANGE Continuous reliable power..... Our 30W PLL Stereo Transmitter system comprises of a 1W driver and a 30W power amplifier. This neat combination is suitable for professional fm broadcasting in most countries of the world. The transmission range of this transmitter used with an high gain antenna could be up to 12 miles. Any frequency between 87.5 to 108 MHz can be accurately programmed on the internal dip switches and locked up to meet the broadcast spec in less than 15 mins. By adjusting a small pre-set control inside the power amplifier unit the RF power output level can be set anywhere from 1W to 30W. Internal jumpers inside the driver allow the audio pre-emphasis to be easily selected to the correct time constant of 50uS, 75uS (USA) or none. Expensive test equipment is NOT required. Setting up is a simple task using the LED's on the front panel. This transmitter system operates on any AC supply from 90V to 260V or 13.8V DC, this makes battery backup very easy and suitable for use anywhere in the world. This FM transmitter along with all our other products comes with a full twelve month guarantee and our reputation of high reliability. On delivery the equipment is ready to plug in and use with any suitable 50 ohm antenna system such as our Vertical 5/8 Wave, Single Dipole or Stacked Dipole. The measurements below were carried out using the supplied mains power supplies over the following extreme operating conditions. - ambient temperature: 0°C to 40°C; - mains voltage: Uo + 6% to -10%; Power Supply Input Voltage Output Voltage 1W Driver Unit Input Voltage Audio Freq Response Stereo Crosstalk Audio Input Sensitivity Audio S/N Ratio Deviation Sensitivity Stability Pre-emphasis Pilot Tone Freq RF Power Connector RF Freq Range RF Freq. Fine Adjustment RF Freq Stability RF Power Output Physical Dimensions 30W Power Amplifier Input Voltage RF Freq Response RF Input Power RF Input VSWR RF Input Connector RF Output Power RF Output Adjustment RF Output Harmonics and Spurious RF Output Ruggedness RF Output Connector Physical Dimensions 90-260VAC 50/60Hz 13.8V DC 4.4A max. 13.8V DC 0.5A typ. 30Hz to 15 KHz +/- 0.5dB 35dB 0dBu 775 mV rms adjustable Better than 72dB +/-2% max 50 uS (75uS USA) 19KHz +/-0.2Hz BNC 50 ohm 100KHz steps from 87.5 to 108MHz +/- 1000Hz +/- 2 KHz max. +/- 300Hz typ. Typ. 900mW from 87.5 to 108 MHz 152 x 64 x 230 mm 13.8V DC 3.9A typ. 87.5 to 108.0 MHz 1W max. Less than 1.5 BNC 50 ohm 30W min. 34W typ. Less than +/-1dB 1W to 30W Better than -75dB rtc. Any Mismatch SO239 (or optional N type) 50 ohm 152 x 64 x 230 mm OUR PRICES INCLUDE SHIPPING! Select your area from the map below

Online Credit Card Ordering via our Secure Server See Ordering Information For Details

FM Transmitters > FM Transmitter Kits > Broadcast Antennas > Studio Audio Equipment > Radio Broadcasting Systems
Aareff Transmission Systems > Phone +34 950 634 349 © 2005 Aareff Transmission Systems