FM TRANSMITTER AND
BROADCASTING
SYSTEMS

1 WATT FM TRANSMITTER
PROFESSIONAL RANGE
Continuous reliable power.....
Our new range of PLL Stereo Transmitters integrate the Aareff Crystal Coder, PLL Drive and Power Amp to give you everything you need, all in one enclosure. This neat combination is suitable for driving our power amplifiers.

Any frequency between 87.5 to 108MHz can be accurately programmed on the internal dip switches and tuned up in about 10 mins.

Expensive test equipment is NOT required, set up is a simple task using the LED's on the front panel. The transmitter operates from a 13.8V DC supply, this makes it suitable for use on a standard power pack or automobile power system anywhere around the world.

This FM transmitter along with all our other products comes with a full twelve month guarantee and our reputation of high reliability. On delivery the equipment is ready to plug in and use with any suitable 50 ohm antenna system such as our Vertical 5/8 Wave, Single Dipole or Stacked Dipole.


Power Input

RF Power Output
RF Output Connector
Spurious Emissions
Harmonic Emissions
Out of Lock RF Muting
Freq Range
Freq Stability
Freq Fine Adj
Freq Adj. Accuracy
Deviation Sensitivity Stability

Audio Input Connector
Pre-emphasis
Audio Input Sensitivity
Signal To Noise Ratio
Freq Response (Mono/MPX)
Freq Response (Stereo)
Audio Distortion
Stereo Crosstalk
Pilot Tone Freq
Pilot Tone Stability
13.8VDC or 115/230 VAC 50/60 Hz with optional PSU

1 Watt +/- 0.5 dB from -20 to +40 Deg C
BNC
>75dB rtc
>60dB rtc
>60dB rtc
100KHz steps from 87.5 to 108MHz
Better than +/- 2 KHz from -20 to +40 Deg C Better than +/- 300 Hz typ.
> +/- 1000Hz
+/- 50 Hz
+/-2% max

Phono/ RCA type unbalanced sockets
(50uS/ 75uS/ None) Selectable
0.775 V rms for +/- 75 KHz
80 dBu
Flat from 30 Hz to 76 KHz
30Hz to 15 KHz +/- 0.5dB
Better than 0.02 % THD
35dB
19KHz
0.2Hz